Sony DVS-V6464B/V6464M Network Router User Manual


 
5-2
ROUTING SWITCHER SYSTEM (E)
5-1. Setting Items of the Primary Station
B: SET SOURCE/DEST TYPE
Purpose
This menu is used to set the type name of the source
destination and global phantom table.
The menu makes the management of source/destination
easier.
Setting Procedure
1. Select menu item [B].
2. Use the cursor or alphabet/numerical keys and select
the codes for the type name to be registered from the
sixteen character codes (0 to 9 and A to F) displayed
on the screen.
3. When [Ctrl] _ [P] is pressed, the setting of the type
name will be canceled, and “ · · · · ” will be displayed.
4. When [Enter] is pressed, the type name can be set. If
[Enter] is pressed again before entering the type
name, the registration will be deleted and the cursor
moves to the next position.
5. Use the alphabet and numerical keys to enter the type
name (within four letters).
6. When [Enter] is pressed, the type name will be set
and the cursor moves to the next position.
If [Ctrl] _ [F] is pressed before the setting, the
original type name will be returned.
7. When [Ctrl] _ [E] is pressed, the menu screen will be
displayed.
Example of Setting Screen
C: SET DESTINATION NAME
Purpose
This menu is used to set the destination name and protect
function of each output.
A number between 001 to 999 and a type name set at the
menu item [B : SET SOURCE/DEST TYPE] can be set to
each destination. Description name can be set by chang-
ing the name mode at the menu item [J : NAME STYLE].
For details of setting the name, refer to [J] in the menu.
The protect function (to protect the output signal from
being controlled from the remote control unit) prevents the
source signal selected for the specified destination from
being switched by other remote control units.
(During recording and ON AIR, interrupting operations
can be prevented.)
Setting Procedure (Destination Name)
1. Select menu item [C].
2. Press the cursor keys or the function keys to select the
destination number.
3. When [Ctrl] _ [P] is pressed, the set destination name
will be deleted and “ · · · · ” will be displayed.
4. When [Enter] is pressed, the destination name can be
typed.
If [Enter] is pressed again before entering a name, the
registration will be deleted and the cursor moves to the
next position.
5. Select the code assigned to each type name, and use
the numerical keys to enter the destination name.
6. When [Enter] is pressed, the destination name will be
set and the cursor moves to the next position.
If [Ctrl] _ [F] is pressed before the setting, the
original destination name will be returned.
7. When [Ctrl] _ [E] is pressed, the menu screen will be
displayed.
SOURCE/DEST/PHANTOM TYPE DVS-V6464B V2.10 STATION NUMBER 1
0=VTR 1=VCR 2=AUX 3=FLM 4=TEST 5=STU 6=CAM 7=REM
8=CG 9=NETA A=ENG B=ED C=FS D=SS E=BARS F=PHAN 
Ctrl-E:RETURN TO MENU