Sony DVS-V6464B/V6464M Network Router User Manual


 
5-6
ROUTING SWITCHER SYSTEM (E)
5-1. Setting Items of the Primary Station
LEVEL TABLE D
VS-V6464B V2.10 STATION NUMBER 1
1=VID 2=A1 3=A2 4=4 5=5 6=6 7=7 8=8
No. out VID A1 A2 4 5 6 7 8
001 OUT001 VID A1 A2 4 .... .... .... ....
002 OUT002 VID A1 A2 4 .... .... .... ....
003 OUT003 VID A1 A2 4 5 6 7 8
004 OUT004 VID A1 A2 4 5 6 7 8
005 OUT005 VID A1 A2 4 5 6 7 8
006 OUT006 VID A1 A2 4 5 6 7 8
007 OUT007 VID A1 A2 4 5 6 7 8
008 OUT008 VID A1 A2 4 5 6 7 8
009 OUT009 VID A1 A2 4 5 6 7 8
010 OUT010 VID A1 A2 4 5 6 7 8
011 OUT011 VID A1 A2 4 5 6 7 8
012 OUT012 VID A1 A2 4 5 6 7 8
013 OUT013 VID A1 A2 4 5 6 7 8
014 OUT014 VID A1 A2 4 5 6 7 8
015 OUT015 VID A1 A2 4 5 6 7 8
0=IN 1=OUT 2=.... 3=.... 4=.... 5=.... 6=.... 7=.... 
8=.... 9=.... A=.... B=.... C=.... D=.... E=.... F=.... 
F1:SEARCH F2:JUMP Ctrl-E:RETURN TO MENU 
E : SET LEVEL TABLE
Purpose
This menu is used to assign the level name and the level to
each destination name. Up to eight levels can be set.
In this menu, set only the necessary levels. If levels which
have not actually been used are set, the response of the
routing switcher system will become slower. Delete all
levels not needed.
After setting this menu item, the selected levels can be
checked by remote control unit.
Setting Procedure (Setting of Level Names)
1. Select menu item [E].
2. Press the cursor keys or the function keys to select the
level number 1 to 8.
3. When [Enter] is pressed, the level name can be
assigned.
4. Enter the level name using the alphabet and numerical
keys (within four characters).
5. When [Enter] is pressed, the level name will be set.
If [Ctrl] _ [F] is pressed before the setting, the
original level name will be returned.
6. When [Ctrl] _ [Z] is pressed, the level 1 to 8 will be
assigned to all destination names.
7. When [Ctrl] _ [E] is pressed, the menu screen will be
returned.
Setting Procedure (Level Setting
..
..
. Release)
1. Select menu item [E].
2. Use the cursor keys to select the destination level.
3. When [Enter] is pressed, the level name will be
deleted and displayed as “ · · · · ” and the level setting
will be released.
4. You can search the level with the function keys.
Example of Setting Screen
Operating Function Keys
[F1] : SEARCH (To move the cursor to the desired
destination name)
1. When [F1] is pressed, “Please Input DEST
NAME =” will be displayed.
2. Input the destination name to be retrieved.
3. When [Enter] is pressed, the cursor will move
to the desired destination name.
n
When menu item [J] is set to the Description name
mode, [F1] (SEARCH) will have the following
functions.
1. When [F1] is pressed, “Please Input NAME =”
will be displayed.
2. Enter the Description name (within seven
characters) from the head.
3. When [Enter] is pressed, the Description name
entered will be searched.
4. If the desired name does not exist in the screen,
press [F1] again.
[F2] : JUMP (To move the cursor to the number of the
desired destination)
1. When [F2] is pressed, “Please Input DEST
NUMBER =”, will be displayed.
2. Input the destination number to be retrieved.
3. When [Enter] is pressed, the cursor will move
to the desired destination number.
n
If the destination name is not set, the number of the
destination will not be displayed.