Filter
Top Products
39
Chapter 3 Basic Usage
Network Menu
Necessary settings can be configured in order to connect to the network.
t “Connecting to the Network” (page 29) in Chapter 2, “Installation”.
Tape Inventory Menu
Information related to the cartridges can be displayed.
t “Viewing Cartridge Information” (page 60) in Chapter 4, “Operating the
AIT Library”.
The following submenus are in the Tape Inventory Menu.
•“Barcode”
Displays the bar code information.
• “R-MIC”
Displays the R-MIC information.
Password Menu
A password can be assigned to the AIT library. The password is used when
accessing certain menus through your network.
t “Setting or Changing the Password” (page 42) of this chapter.
System Down Menu
This menu is used when shutting down and restarting the system. It is essential
to perform the shutdown procedure before turning off the AIT library with the
power switch.
t “Turning the Power On/Off” (page 19) in Chapter 2, “Installation”.
Control Buttons
The following buttons are on the control panel. Use these buttons to operate the
Control Panel Menu.
[MENU] button
The Control Panel Menu appears.
v button, V button
These buttons are used to select a menu and to input letters and numbers.
• Press v to move to the previous menu, and V to move to the next menu.
Barcode
R-MIC
MENU
Tape Inventory
ENTER