Filter
Top Products
57
Chapter 4 Operating the AIT Library
15
When “[ENTER] to activate”
appears, press the [ENTER] button.
The cartridge dock shutter opens.
16
Insert the cartridge into the slot.
Be sure to insert it all the way.
17
If you selected “1. Single Mode” in
step 13, press the [CANCEL]
button.
Note
Even if you selected “1. Single
Mode” in step 13, you can insert a
different cartridge by using the V
and v buttons to select the slot
element address, and then pressing
the [ENTER] button. Because you
did not select “2. Multiple Mode” in
step 13, the cartridge dock shutter
closes and reopens. When it does,
you can insert another cartridge as
explained above. If you do so, when
you are done inserting cartridges
press the [CANCEL] button and
proceed to step 19.
Slot 01
[ENTER] to activate
Slot 01
Insert Tape
[CANCEL] to exit