Filter
Top Products
67
Chapter 6 Using the Library Administration Menu
Library Administration Menu
When the Library Administration Menu is accessed using a browser, the
following objects can be accomplished through the browser:
• Configure system-related settings
• Configure network-related settings
• Configure SCSI ID-related settings
• Set or change the password
• Update the firmware
• Check the operation condition
• Check the AIT library
• View the AIT library and AIT drive information
•View logs
Accessing Library Administration Menu
Use the browser to operate the Library Administration Menu.
Note
The Library Administration Menu contains English and Japanese pages.
Clicking in the upper-right corner of the page allows you to
alternate between the English and Japanese pages.
1
Launch a browser on a client computer.
2
Enter “http://XXX.XXX.XXX.XXX/” in the “Address” or “Location”
field.
For “XXX.XXX.XXX.XXX”, enter the IP address set in the server.
(e.g., 192.168.0.1)
Note
If the IP address assigned by a DHCP server is being used, enter the current
IP address in the “Address” field of the browser. The current IP address can
be checked with “IP Address” of the Network Menu of the control panel.
The top page of the Library Administration Menu appears.