Filter
Top Products
41
Chapter 3 Basic Usage
Warnings
When the AIT drive needs cleaning or a specific part needs to be replaced upon
reaching its periodic replacement time, a warning message is displayed on the
LCD panel.
The warning messages and their solutions are as follows:
“Cleaning Request”:
The AIT drive needs to be cleaned.
Clean the AIT drive. For information about how to clean the drive,
refer to “Cleaning the AIT Drive” (page 63) in Chapter 5, “Operating
the AIT Drive”.
“Threshold Condition Met”:
The specific part has operated more than the specified number of
times.
Since the specific part has reached the periodic exchange time,
contact the service and support center.
“Drive Information”:
An error occurred in the AIT drive. A two-digit error code appears
after the warning message. For details about these codes, see “Other
Messages” (page 100).
“FanX trouble”:
An anomaly has occurred at fan X (where X is the fan number).
Contact your nearest Sony Service Support Center.
“Cleaning Tape at EOM”:
The spent cleaning cartridge is set. Replace the spent cleaning
cartridge with a new one.
“Clean failure”:
Cleaning failed. Repeat the cleaning procedure.
Errors
When an error occurs in the AIT library, an error code appears on the LCD
panel.
For information about error codes, refer to the “Error Code List” (page 98) in
the “Appendix” chapter.
Warning 12:34
Cleaning request
Error 12:34
********