Filter
Top Products
98
Appendix
Error Code List
When an error occurs in the AIT library, an error code appears on the LCD
panel. The following is a list of error codes that are displayed on the LCD panel.
When an error code appears, contact your dealer.
Changer Manager Errors
Error code Description
01000031 An internal error occurred in the library.
01000032 An internal error occurred in the library.
01000033 Access attempted to a non-existent AIT drive.
The AIT drive may not be connected correctly.
NVRAM Driver Error
Error code Description
02000001 An internal error occurred in the library.
02000002 Could not read/write NVRAM.
Mechanical Manager Error
(Byte2:Axis, Byte1:Class, Byte0:SubClass)
Error code Description
03010101 PickerAxis Timeout occurred during Close Sensor Low
Wait.
03010201 PickerAxis Timeout occurred during Open Sensor Low
Wait.
03010901 Picker sensor malfunction.
03010A01 PickerAxis The tape check sensor is not normal.
03020101 SliderAxis Timeout occurred during Origin Sensor Low
Wait.
03020102* SliderAxis Timeout occurred during Origin Sensor
High Wait.
03020201 SliderAxis Timeout occurred during Position Sensor
Low Wait.
03020202 SliderAxis Timeout occurred during Position Sensor
High Wait.
03020501* SliderAxis Destination not reached.
03020601 SliderAxis Fine tuning not possible.
03020701 SliderAxis Cartridge cannot be removed.
03020801 SliderAxis Cartridge not properly inserted in the drive.
03050101 TableAxis Timeout occurred during Origin Sensor Low
Wait.
03050102 TableAxis Timeout occurred during Origin Sensor
High Wait.
03050201 TableAxis Timeout occurred during Position Sensor
Low Wait.
03050202 TableAxis Timeout occurred during Position Sensor
High Wait.
03050401 TableAxis The Position Sensor is not normal.