Filter
Top Products
I-11
Names and Functions of Parts
Chapter 1 Overview
Menu operations
When you press a menu selection button or an ACCESS/
PFL button, setting items and values appear in the
parameters area at the bottom of the screen. You can use
the corresponding adjustment knobs to perform
adjustments and selections.
Basic adjustment knob operations
Items area
Turn the V1 knob left or right to move the cursor up or
down.
If the B icon appears for an item, pressing the V1 knob
moves to the sub menu of that item.
Parameters area
Turn the V2 to V4 knobs left or right to increase, decrease,
or cycle through setting values.
You can make incremental adjustments to parameters in
the [Effect] menu, [Key] menu (excluding some
parameters in the [Resizer] menu), and the [Misc] menu
that include decimal number values by turning the knobs
while pressing them.
If an action (saving, applying of setting values, etc.) is
associated with the respective item, pressing the knob
performs this action.
3 Cross-Point Control Block
a Bus delegation buttons
(c Advanced Settings)
• BKGD (background) button (page I-35)
•KEY button (pages I-29, I-30, I-35)
• AUX 1 and 2 (auxiliary) buttons
(c Advanced Settings)
b PGM (program) cross-point buttons 1 to 8/
SHIFT (pages I-19, I-25)
c PST/KEY (preset/key) cross-point buttons 1 to
8/SHIFT (pages I-19, I-25)
4 Transition Control Block
a Transition type selection buttons
• MIX button (pages I-26, I-27)
• EFF (effect) button (pages I-26, I-27)
b Next transition selection buttons
• BKGD (background) button (page I-12)
•KEY button (pages I-12, I-29, I-30)
c FTB (fade-to-black) button
When you press the FTB button, the current program
output image will fade out to a black screen. When you
press the FTB button again, the original image will fade
in from the black screen.
d AUTO TRANS (auto-transition) button
(page I-26)
e CUT button (page I-26)
f Transition indicators (page I-27)
0001
Rate
SS
Mon
PGM
Effect
2/8
Back
Effect Transition
Wipe Adjust
Wipe Edge
Modify Direct
PtnNum
Norm 1
3011
Enter
V1 V2 V3 V4
Parameters
area
Items area
3
12
1
2
3
457 86