Filter
Top Products
I-6
About This Manual
About This Manual
This manual describes the preparations necessary to use
this unit and its basic operations.
Basic video switching and composition operations and
audio mixing can be performed by following the procedure
in this manual.
For details on advanced settings and operations, see the “Operating
Instructions (Volume II Advanced Settings).”
How to Read the Manual
Notes on setting values
Setting values that appear in bold indicate factory default
settings.
Example:
About references
References to the Operating Instructions (Volume II
Advanced Settings) are indicated by the c mark as
follows.
Example 1:
POS (position) button (c Advanced Settings)
Example 2:
For details, see “Message List” (c Advanced Settings).
To find information on a specific topic
See “Index” (page I-43) at the end of this manual.
The index indicates whether the information can be found
in “Volume I Basic Operation” or “Volume II Advanced
Settings” and the corresponding page numbers.
Chapter 6 3D System
Overview
Making the Necessary Settings
Chapter 7 Controlling External
Devices
Enabling/Disabling Operation from External Devices
Connecting with External Devices
Details on [GPI/Tally] Menu
Chapter 8 Setup ([Setup] Menu)
Overview
System Setup (System)
Audio Setup (Audio)
Video Input Setup (Video (Input))
Assigning Video Input Signals to the Cross Point
Buttons (Video (XPT))
Video Output Setup (Video (Output))
Setup of Other Video Related Items (Video (Misc))
Displaying Various Information (Information)
Installing Application Software and Firmware
(Install)
Appendix
Message List
Index
Knob Parameter Meaning Setting values
V3 Format Signal format 108059, 108050,
720p59, 720p50,
480i59, 576i50,
Test1 , Test2, Test3
V4 Aspect Aspect ratio 16:9, 4:3