Filter
Top Products
I-20
Configuring Video Signal Settings
Chapter 2 Preparations
The following assignments are set under factory default
settings.
Configuring the Format of the Signal
Input to the DVI-I Connector
To use DVI video inputs, configure the format of the signal
input to the DVI-I connector on the rear panel of the unit.
1
Press the SETUP button to display the [Setup] menu.
2
Turn the V1 knob to select [Video (Input)], and press
the knob.
3
Turn the V1 knob to select [DVI], turn the V3 knob to
select the signal format, and press the knob.
Notes on setting values
XGA: Analog, 1024
× 768/60
SXGA: Analog, 1280
× 1024/60
WXGA: Analog, 1280
× 768/60
HDTV50: Digital, 1080p/50
HDTV60: Digital, 1080p/60
Digital signals are not accepted (i.e., not supported) in
720p/59.94, 720p/50, 480i/59.94, or 576i/50 mode.
Tip
PGM, PST/KEY
cross-point button
Default setting
1SDI1
2SDI2
3 SDI3
4SDI4
5DVI
6H/V1
7H/V2
8 H/V3
Knob Parameter Meaning Setting values
V3 Format Signal format of
DVI-I video
input
XGA, SXGA,
WXGA,
HDTV50,
HDTV60
0001
Rate
30
SS
Mon
PGM
Setup
4/11
Select
Audio
Video (Input)
Video (XPT)
Video (Output)
Enter
0001
Rate
30
SS
Mon
PGM
Video (Input)
5/11
Select Format
Name
XGA DVI
DVI
HDMI1
HDMI2
HDMI3
Note