Filter
Top Products
I-17
Configuring System Settings
Chapter 2 Preparations
Configuring System
Settings
Configure the system mode, system date and time, and
other system settings in the menu control block.
For details on operations, see “Menu operations” (page I-11).
Configuring the Signal Format and
Aspect Ratio
Specify the image signal format and aspect ratio to be used
by the unit.
1
Press the SETUP button to display the [Setup] menu.
2
Turn the V1 knob to select [System], and press the
knob.
3
Turn the V1 knob to select [System Format], and
select the signal format and aspect ratio with the
respective knobs.
Notes on setting values
108059: 1080i/59.94 (HD mode)
108050: 1080i/50 (HD mode)
720p59: 720p/59.94 (HD mode)
720p50: 720p/50 (HD mode)
480i59: 480i/59.94 (SD mode)
576i50: 576i/50 (SD mode)
Test1: Used for tests.
1)
Test2: Used for tests.
Test3: Used for tests.
1) When [Test1] is selected while VGA signals (640 × 480/
59.94p, 60p) are input to HDMI IN 1 to 3, and you select
HDMI inputs 1 to 3 using the PGM cross-point buttons 6
to 8, 480i/59.94 signals will be output to PGM OUT.
Under normal circumstances, do not use the Test1 to
Test3 settings as they are intended for tests.
Functioning and performance are not guaranteed if
you use Test1 to Test3.
4
Press the V3 or V4 knobs.
A confirmation message appears.
5
Press the V3 knob.
The confirmation message disappears.
6
Turn off the unit and turn it on again.
The unit will restart with the specified signal format
and aspect ratio applied.
V1 V2 V3 V4 SETUP
0001
Rate
30
SS
Mon
PGM
Setup
2/11
Select
Startup Define
System
Audio
Video (Input)
Enter
Knob Parameter Meaning Setting values
V3 Format Signal format 108059, 108050,
720p59, 720p50,
480i59, 576i50,
Tes t1 , Tes t2, Test 3
V4 Aspect Aspect ratio
16
:9, 4:3
Note
0001
Rate
30
SS
Mon
PGM
System
1/8
Select Format
Aspect
108059
16:9
Back
System Format
3D Mode
System Reference
OK