Filter
Top Products
Viewing Photos/Still Images
109
Viewing a single photo
1 From the Index view, press the direction arrow buttons to highlight the
desired photo, then press the SELECT button.
A submenu appears.
2 Press the up or down arrow button to highlight Show selected picture, then
press the SELECT button.
The selected photo is displayed in full view mode.
Press the PLAY button to start the slide show from the selected photo.
Changing the slide show settings
You can set the time interval between the photos in a slide show or set the photos
to display in a loop (repeat).
1 Press the OPTIONS button while the Photo - All Libraries screen is
displayed.
The OPTIONS menu appears.
2 Press to highlight Photo Settings, then press the SELECT button.
The Photo Settings screen appears.
3 In the Slide Show Interval section, use the right or left arrow buttons to
highlight a time value, then press the SELECT button.
Photo Settings screen
/
Settings
Photo Settings
OK
3 sec
Slide Show Interval
5 sec
Manual
On
Slide Show Repeat
Off
SELECT
:Select
RETUR
N
:Return
CANCEL
7 sec
10 sec