Filter
Top Products
RoomLink User Guide
116
❑ To use the automatic resume feature
*
, the VAIO computer must be in the
Standby or the Hibernate mode. See “Configuring your VAIO computer to
start automatically” on page 62.
❑ Verify that the IP address of the network media receiver is being obtained
properly. If using a router device, RoomLink™ and the VAIO computer
must be configured to obtain the IP address automatically.
If “Obtain the IP address automatically” is specified in the IP Address
screen, an IP address is shown in the IP Address screen.
❑ Giga Pocket™ Server is running.
To start Giga Pocket Server, follow the steps below.
1 Click Start on the Windows taskbar and select All Programs.
2 Point to Giga Pocket, point to All Software, and click Giga Pocket
Server. The Giga Pocket Server window appears.
❑ The VAIO® computer may have become unstable. Turn off and restart the
VAIO computer, and then follow the previous steps to start Giga Pocket
Server.
❑ The desired server is not displayed in the Select a server screen.
To refresh the Select a server list, follow these steps:
1 Press the OPTIONS button on the Remote Commander® unit, then
select Refresh.
2 Press the SELECT button.
Refreshing the list may take longer than a few moments.
❑ Verify that Music Server and Photo Server are running on the VAIO
computer and that their status is shown as “Started.”
❑ To use the TV or Video features, the VAIO computer must be running and
have a user logged on. Remember to log on to your VAIO computer before
attempting to use RoomLink™.
* RoomLink™ automatically brings the VAIO computer out of Standby or Hibernate mode.
✍ If this is the first time you have used Giga Pocket™, the Set Password for Giga Pocket
Server dialog box is displayed. See “Configuring Giga Pocket Software” on page 55,
for more information.