Sony PCNA-MR10 Network Card User Manual


 
4
Safety Information
This Sony product is designed and tested to comply with the safety regulations. Use of this equipment
in a manner not approved in this manual may be hazardous. Read the safety and caution information
before operating RoomLink™, complying with all safety precautions and warnings.
Notes on Use
About RoomLink
Set up RoomLink™ and connection cables in a protected location out of the reach of children,
to avoid injury or damage to the equipment.
Install RoomLink™ so that you can easily reach the power outlet in the event of an emergency.
Do not drop RoomLink™. A sharp impact can damage the unit.
Do not place RoomLink™ in the following locations:
In direct sunlight or near heat sources. Operate this equipment at temperatures between 32
to 104 degrees (Fahrenheit).
On or near equipment that generate electromagnetic fields, such as speakers or televisions.
On or near a microwave oven.
In a dusty or dirty location
On an insecure or uneven surface.
In a location that is subject to vibration.
Stop operating the unit immediately, under these circumstances:
The unit emits smoke or fumes. The unit makes loud or unusual noise.
Water or any foreign object has fallen
into the unit.
The unit has been dropped or otherwise
damaged.
Follow these steps to reduce any potential hazard:
Unplug the AC adapter from the AC wall outlet or power supply strip.
Unplug the AC adapter and cables from the unit.
Contact the Sony Customer Service Center for repair information.