Sony PCNA-MR10 Network Card User Manual


 
5
In a location that is subject to moisture or rapid temperature change.
Near obstacles that shield or block electrical signals, such as metal or concrete walls.
In a location with poor ventilation.
If there is a rapid change in temperature, condensation (water droplets) may form in
RoomLink™, causing it to malfunction.
If this occurs, disconnect the equipment from the VAIO® computer and TV for two to
three hours. The unit should resume normal operation.
To clean the RoomLink™ device:
Wipe it with a soft, dry cloth.
If the unit requires more cleaning, use a soft cloth that is slightly moistened with a mild
detergent solution. Avoid getting the terminals wet.
Do not use cleaners that contain thinner, benzene, or alcohol, as these compounds may
damage the surface of the equipment.
Avoid connecting these phone lines to the Network connector on the unit:
Private Branch Exchange (PBX) lines
Network cable that do not meet the 100Base-TX standards
Home or business phone lines
About the AC adapter
Use the AC adapter that is supplied with RoomLink™. Using different AC adapter may cause
damage to the network media receiver.
Unplug the AC adapter from the AC wall outlet, when the equipment is not being used for
extended periods of time.
About the Remote Commander
Use only AA-size alkaline batteries in the Remote Commander® unit.
Remove the batteries from the Remote Commander when it is not in use for extended periods.