Filter
Top Products
1-11
VPL-CS2/CX1
GB
20
Selecting the Menu Language
Selecting the Menu Language
You can select one of seven languages for displaying the menu and other on-
screen displays. The factory setting is English.
1
Open the front cover, then plug the AC power cord into a wall outlet.
2
Press the
I
/
1
key to turn on the projector.
3
Press the MENU key.
The menu appears.
The menu presently selected is shown as a yellow button.
1
RESET MENU
POWER
INPUT
APA
VOLUME
POWER SAVING
ON/STANDBY
FAN/TEMP
LAMP/COVER
ENTER
I / 1
3
2
4,5,6
+
–
4,5,6
2
3
I / 1
PIC
INPUT
MUTING
MENU ENTER
VOLUME
RESET
APA
+
+
–
R
Front remote control
detector
80
50
PICTURE CTRL
CONTRAST:
BRIGHT:
GAMMA MODE: GRAPHICS
COLOR TEMP: HIGH
INPUT-A
21
GB
Selecting the Menu Language
Setting Up and Projecting
4
Press the >. or key to select the SET SETTING menu, then press the /
or ENTER key.
The selected menu appears.
5
Press the >.
>.
or key to select “LANGUAGE,” then press the / or
ENTER key.
6
Press the or key to select a language, then press the ? or ENTER
key.
The menu changes to the selected language.
To clear the menu
Press the MENU key.
The menu disappears automatically if a key is not pressed for one minute.
SET SETTING
STATUS: ON
INPUT-A: RGB
KEYSTONE MEMORY:
OFF
DIGITAL KEYSTONE:
OFF
LANGUAGE: ENGLISH
POWER SAVING
:OFF
SIRCS RECEIVER:
FRONT&REAR
LAMP TIMER:
00010h
INPUT-A
SET SETTING
S TATU S: O N
INPUT-A: RGB
KEYSTONE MEMORY:
OFF
DIGITAL KEYSTONE:
OFF
LANGUAGE: ENGLISH
POWER SAVING
:OFF
SIRCS RECEIVER:
FRONT&REAR
LAMP TIMER:
00010h
INPUT-A