Filter
Top Products
37
Security settings
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Schablone 2004_12_27
SSID
Before the wireless network components can communicate with each other, they must
all use the same SSID (Service Set Identifier).
On delivery, the Gigaset SE366 WLAN's default SSID is ConnectionPoint.
ì Enter a character string of your choice in the SSID field. The SSID is case sensitive. It
can be up to 32 alphanumeric characters long.
Make a note of the SSID. You will need it to configure your wireless network adapter.
Note:
u If you already have performed WPS registration (see page 68), you will see the
generated SSID on this screen. Do not change the SSID in this case. Otherwise, you
will have to register all connected clients again. You may even have to perform a
factory reset of your Gigaset SE366 WLAN.
u If you are not using WPS, you should change the SSID for security reasons. You
have to make this change on all wireless network adapters.
Note:
The connection to the wireless network adapters will be interrupted until the new
SSID has been entered in them as well.