Filter
Top Products
42
Security settings
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Schablone 2004_12_27
ì To go to the next step in the Security Setup Wizard, click Next >.
Access control within the wireless network
In this step you can specify which PCs will have wireless access to the Gigaset SE366
WLAN and hence to your LAN. Access control is based on the MAC addresss of the PCs'
network adapters. You can enter the MAC addresses for the PCs manually or select them
from the list of PCs that are currently logged in.
The default setting for access control is disabled. This means that all PCs that use the
correct SSID and the right encryption method can log in.
ì Next to MAC address filter select the option On to activate MAC filtering.
Entering MAC addresses manually
ì Enter the MAC address of the network adapter. You will normally find this address
on a label on the device.
ì Enter a name for the PC.
ì Click Add to add the entry to the list.
Note:
u It is very important that you make a note of the key or passphrase. You will
need this information to configure the wireless network adapters correctly.
u When you have concluded the Security Setup Wizard you must also change the
WEP encryption data of the wireless network adapters in the connected PCs
since, without the change, they will not be able to access the Gigaset SE366
WLAN's wireless network.