Filter
Top Products
70
Configuring the Advanced Settings
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Schablone 2004_12_27
WPA with pre-shared key (WPA-PSK)
WPA-PSK is a special WPA mode that provides encryption protection for users at home
and in small companies without a company authentication server. Encryption keys are
automatically generated with the pre-shared key and automatically changed (rekeying)
and authenticated between the devices after a certain period of time (Rekey interval).
Which standard of encryption you can choose depends on the components in your
wireless network. Every PC (network adapter) that requires access to a wireless network
protected by WPA must also support WPA. To find out whether and how you can use
WPA on your PC, read your network adapter's operating instructions. If all components
support WPA2, select the WPA2-PSK option. If you are using network adapters that only
support WPA, select the WPA2-PSK / WPA-PSK option. The entries described below are
the same for both options.
ì Select the required option in the Security field.
ì Enter a key in the Pre-shared key field (up to 63 alphanumeric characters) and
confirm it by entering it again.
ì By clicking the Unmask button, a message showing the pre-shared key is output in
readable characters.
ì Apply the settings by clicking OK.
WPA2 and WPA with authentication server
In large networks (e.g. in business enterprises) WPA enables the use of an additional
authentication service. In this case, user access is controlled by user accounts and pass-
words, in addition to WPA encryption. A RADIUS server acts as an authentication server.
You can select the new standard WPA2 if this is supported by all components in your
wireless network, or select WPA2 / WPA if you are using devices that only support WPA.
You cannot use WPA2 / WPA together with WPS.
ì Select the required option in the Security field.