Filter
Top Products
50
Configuring the Advanced Settings
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Schablone 2004_12_27
ì Select the MAC address that is to apply to the Internet connection:
– Use default device MAC address: You can leave this default setting if the MAC
address of the Gigaset SE366 WLAN is used to connect to the Internet.
– Use MAC address of this PC: Select this option if the MAC address of the cur-
rently connected PC was previously registered for connecting to the Internet or if
you have re-registered the MAC address of the PC on which you are currently
working.
– Use custom MAC address: Select this option if you have asked your Internet pro-
vider to register a new MAC address and this is not the MAC address of the PC on
which you are currently carrying out the configuration.
ì Click OK to apply the settings.
Firewall
The firewall functions of the Gigaset SE366 WLAN include various security functions for
your local network.
You can:
u protect your network against hacker attacks (see below),
u block individual PCs' access to individual services or Internet sites(see page 53).
The firewall functions for the Gigaset SE366 WLAN are activated and configured in the
factory. If you wish to deactivate the firewall, carry out the following steps:
ì In the Advanced Settings – Internet menu, select the entry Firewall.
ì Select the required option.
ì Click OK to apply the settings.