Filter
Top Products
79
Administration and status information
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / admin_router.fm / 13.11.2008
Schablone 2004_12_27
Internet Time
The System time for your device is automatically synchronised with the time server on
the Internet. The time of the Last synchronization with time server is displayed for
your information.
ì If you wish to use your own time server, select the On option next to the Use custom
time servers field.
ì Enter the Internet addresses for the time servers in the Preferred time server and
Alternate time server fields respectively.
ì Click OK to apply the settings.
System Password
You can assign a System Password for the configuration environment of your Gigaset
SE366 WLAN and specify the period after which a session is to end automatically if no
further entry is made.
ì In the Administration menu, select System Password.
After installation, the configuration of the Gigaset SE366 WLAN is protected by default
with the System Password admin. To prevent unauthorised changes to the configura-
tion, you should set your own System Password and change it from time to time.
ì If you have already set a System Password, enter the old System Password in the Cur-
rent password field.
ì Enter a new password in the New password field and repeat it in the Confirm new
password field.
The password may contain up to 32 characters. The password is case sensitive. Avoid
proper names and all too obvious words. Use a combination of letters, numbers and
special characters.