Filter
Top Products
7
Features
Chapter 1 Overview
Features
High Brightness, High Picture Quality
High brightness
The SRX-T110 uses two 2 kW Xenon lamps as a light
source, and the SRX-T105 uses two 1 kW Xenon lamps.
These compact-size Xenon lamps provide high brightness
of 11,000 lumens for the SRX-T110 and 5,500 lumens for
the SRX-T105, assuring excellent uniformity on the entire
screen.
High resolution
Sony’s new, unique three SXRD™ (Silicon X-tal
Reflective Display) panels with about 8,850,000 pixels
realizes a high-resolution of 4096 × 2160 dots. The
resolution corresponds to four times that of an HDTV
image.
Multi-screen mode
The high resolution of the projector enables single-, dual-
and quad-mode projection in which full HD images can be
displayed even in each of two or four divided screens.
Images from different input sources can be displayed in
these divided screens simultaneously.
High contrast ratio
The combination of the SXRD imaging devices and 3PBS
optical devices offers a high contrast ratio of 2500:1.
Gamma correction circuit
You can select a gamma value from 1.80 to 2.59 in 0.01
steps according to the signal input. (The values of 2.2 and
2.6 are fixed.) This allows projection of an image with
optimum brightness. (Only three types of gamma
correction circuit, 1.8, 2.2 and 2.6, may be selectable
according to the optional input board.)
Color space feature
The projector supports four standards of color tonal
reproduction range, sRGB(ITU-R BT.709), DCDM,
Adobe RGB and CIE XYZ, allowing you to obtain an
image with precise color reproduction according to the
input sources.
Squeeze function
A squeezed signal with a 4:3 aspect ratio is stretched
horizontally to fit a 16:9 screen, and a signal with a 16:9
aspect ratio is stretched horizontally to fit a 2.39:1 screen.
This function is available only for projection in single-
screen mode and may not work depending on the signal
type input.
Flexible and Reliable System
Dual lamp system
The projector adopts a dual lamp system for versatility of
use. You can select dual-lamp or single-lamp mode, and
can reduce each lamp’s power output. These modes allow
you to save power and increase lamp life.
Also, if one bulb burns out, the other keeps projecting
images.
Versatile Setup
Various signal input
The projector is equipped with an RS232C connector and
ETHERNET connector for communication. For signal
inputs, the projector has four slots to which the optional
analog input boards, HD-SDI input boards and DVI-D
interface boards can be attached according to your
requirement.
Optional lens
Optional zoom lenses are available depending on the
projection distance you are setting up. The lens shift
function of this projector enables easy setup.
When the optional zoom lens equipped with zoom/focus
memory function is installed, you can register the zoom
and focus settings adjusted to fit the desired screen size.
Registration of the settings adjusted for screen sizes of
aspect ratio of 4:3 and 16:9 allows you to switch between
them easily with the buttons in the window of the SRX
Controller.