Filter
Top Products
General Description PcOS Series 150 Programmer's Guide
Page 4 Rev G 12/14/99
Model 151: Receipt Printer
The Model 151 receipt printer only provides receipt functions. The last line printed on the receipt is
within one inch of the tear-off or cut-off edge. The receipt printing appears right-side up with the
total at the bottom as the receipt appears from the top of the printer and is presented to the operator.
The receipt printer handles one-, two-, or three-ply paper. The optional cutter is able to cut one- and
two-ply paper.
The Model 151 printer does not have the ability to validate. Commands that operate validation modes
on other Series 150 Printers will not function.
Model 152: Receipt/Journal Printer
The Model 152 receipt/journal printer adds the journal feature to the Model 151 receipt printer. The
journal take-up is able to rewind the second copy of the 3.5-inch diameter 2-ply paper roll (125 feet).
The Model 152 printer does not have the ability to validate. Commands that operate validation modes
on other Series 150 Printers will not function.
Model 153: Receipt/Journal/Validation Printer
The Model 153 receipt/journal/validation printer adds a validation capability to the Model 152. The
validation will accommodate up to 16 lines at 8.0 lines per inch (lpi) or 12 lines at 6.0 lpi.
The form is inserted from the front and extends out the left side and/or top of the printer. It rests on a
fixed form stop. The validation movement is controlled from the movement of the receipt and journal.
Model 154: Receipt/Validation Printer
The Model 154 receipt/validation printer adds validation, as described above, to the Model 151. This
is a Model 153 without journal take-up.