Filter
Top Products
Next place the ribbon cartridge on the print head carriage, guiding the
ribbon between the print head and the platen. Press down firmly on the
cartridge until it snaps into place.
Replace the top cover
Hold the cover upright and engage the tabs at the back. Then swing
the front edge down until the cover is closed.
Leave the cover closed during normal operation. It keeps out dust and
dirt and reduces the printer’s operating sounds. Open the cover only to change
the ribbon or make an adjustment.
lnsfall the optional IC card
This printer has five built-in character styles (fonts), and a 7 K-byte
data buffer.
You can add more fonts or expand the data buffer by installing optional
IC cards (Font card or RAM card).
To install or change an IC card, first turn off the power switch. Then,
insert the IC card into the slot at the bottom right front of the printer and
slide it all the way in.
I
figure 1-5. Slide the IC card into the front slot with the power switch off.
5