Filter
Top Products
Define line spacing to n/72 inch
Mode
ASCII
Decimal
Hexadecimal
IBM
<ESC> “A” n 27 65 n 1B 41 n
Defines the distance the paper advances or reverses in subsequent lines
feeds to n/72 inch, where n is between 1 and 85. If n = 0, this command
is ignored. The new line spacing does not take effect until the next < ESC >
“2” command.
Execute < ESC > “A”
Mode ASCII Decimal
Hexadecimal
IBM ‘ESC> “2” 27 50
1B 32
Sets the line spacing to the value defined by the last preceding < ESC >
“A” command. Sets the line spacing to l/6 inch if there is no preceding
< ESC > “A” command.
Line feed
Mode
ASCII
Decimal
Hexadecimal
I
Both 1 <LF>
1 10 IOA
Prints the current line and feeds the paper to the next line. If DIP switch
l-2 is ON, also moves the next print position to the left margin. See the
preceding commands for the line spacing.
Reverse line feed
Mode
1 ASCII
Decimal
Hexadecimal
I
Both 1 <ESC> <LF> 27 10
IlB OA
I
Prints the current line and feeds the paper in the reverse direction to the
preceding line. If DIP switch l-2 is ON, also moves the next print position
to the left margin. See the preceding commands for the line spacing.
Ignored when friction feed is used.
Select forward feed mode
Mode
ASCII Decimal
Hexadecimal
Std. 1
<FS> “F” 1 28 70
IlC 46
I
Cancels the reverse feed mode and selects forward feed mode. This is the
default setting at power-up.
Select reverse feed mode
I Mode I ASCII
I
Decimal
I Hexadecimal I
Std.
i
<FS> “R” 28 82
1C 52
Selects reverse feed mode. Reverses the direction of all vertical move-
ments. Ignored when friction feed is used.