Filter
Top Products
increase character spacing
IModel ASCII
I
Decimal
I
Hexadecimal I
Std. 1
<ESC> “” n
21 32 n
IB 20 n
Increases the space between characters by n dots, where n is a number
from 0 to 127. Used in microjustification.
Select double or quadruple size
Mode ASCII
Decimal Hexadecimal
Both <ESC> “h” n
27 104 n
1B 68 n
Selects the size of subsequent characters as shown below. Extra-high
characters align along the cap-line of normal characters, with the base
line temporarily moving down. Line spacing is temporarily doubled when
n = 1 and quadrupled when n = 2.
n Effect
0 Normal size
1 Double-high, double-wide
2 Quadruple-high, quadruple-wide
Print double-height characters
IModel ASCII
I
Decimal
I
Hexadecimal I
<ESC> “W” “ 1” 27 119 49 1B 77 31
Both
<ESC> (‘W)’ <I> 27 119 1 1B 77 01
<FS> “V” “ 1” 28 86 49 1C 56 31
Std.
<FS> “V” Cl> 28 86 1 1C 56 01
Prints subsequent characters at double height without moving the base
line, and without changing the line spacing.
Return to normal height
IModel ASCII I Decimal I Hexadecimal I
I
<ESC>
“WI’ “0”
119 48 1B 77 30 Both I27 1
<ESC> “W” co> I27 119 0 1 1B 77 00
<FS> “V” “0” 28 86 48 Std. IlC 56 30
<FS> “V” co> 28 86 0 1C 56 00
Terminates double-height printing and prints subsequent characters at
normal height.
66