Star Micronics NX-2410 Printer User Manual


 
Sets the right margin at column n in the current character pitch (pica
pitch if proportional spacing is currently selected). Column n becomes
the last character position in the line. The right margin does not move
if the character pitch is changed later. The right margin must be within
the limits below:
Pica 4snn80
Elite 5sns96
Semi-condensed 6 sn 5 120
Condensed pica 7 5 n 5 137
Condensed elite 8 5 n 6 160
Expanded pica 2snj40
Expanded elite 3snn448
Expanded semi-condensed
3sns60
Expanded condensed pica 4sns68
Expanded condensed elite 4jnj80
Set left and right margins
Mode ASCII
Decimal
Hexadecimal
Both I <ESC>
“X” nl n2
I27 88 nl n2 IlB 58 nl n2
Sets the left margin at column nl and the right margin at column n2.
See the preceding commands for margin restrictions and other notes.
Carriage return
Mode ASCII
Decimal
Hexadecimal
Both I
<CR>
I 13
1 OD
Prints the current line and returns the next print position to the left margin.
If DIP switch l-8 is ON, also performs a line feed.
Set automatic line feed
Mdde ASCII
Decimal
Hexadecimal
IBM
<ESC>
5
<I>
21 53 1 1B 35 01
Causes the printer to perform both a carriage return and line feed each
time it receives a < CR > code. This command takes priority over DIP
switch 1-8.
Cancel autoniatic line feed
Mode
ASCII
Decimal
Hexadecimal
IBM I <ESC> “ 5 co> 127
53 0 1 IB 35 00
Causes the printer to perform only a carriage return when it receives a
< CR > code. This command takes priority over DIP switch l-8.