Filter
Top Products
CHARACTER SET COMMANDS
L
Select standard character set
pi
Selects the standard character set. This is the power-up default in Standard
mode if DIP switch l-7 is ON.
Select IBM character set
~~
Selects an IBM character set. This is the power-up default in IBM mode
if DIP switch 1-7 is OFF.
Select character set ##7
Mode
ASCII
Both <ESC>
“7”
Selects character set #l.
Select character set #2
Decimal Hexadecimal
27 55 IB 37
Mode ASCII
Decimal
Both <ESC>
“6”
27 54
Selects character set #2.
Select international character set
Hexadecimal
1B 36
Mode ASCli
Decimal Hexadecimal
Std. <ESC>
“R” n
27 82 n 1B 52 n
IBM
<FS>
“R” n
28 82 n IC 52 n
Selects an international character set according to the value of n as shown
next.
61