Filter
Top Products
Select ROM character set
Mode ASCII
Decimal Hexadecimal
<ESC> “O,o”
“0” 21
37 48 IB
25 30
Both
<ESC> ‘C% 93
<o> 27
37 0 1B
25 00
Stops using the download character set and returns to the built-in ROM
character set. Ignored when DIP switch 2-l is ON.
OTHER PRINTER CONTROL COMMANDS
Set MS6 to 7
Mode
ASCII
Decimal Hexadecimal
Both <ESC>
“ > 33
27 62 1B 3E
Sets the most significant bit of each subsequent byte received to 1, allowing
users with a 7-bit interface to access characters with ASCII codes greater
than 127.
Set MS8 to 0
Mode
ASCII
Decimal Hexadecimal
Std.
<ESC> “=”
27
61 1B
3D
IBM
<ps> “T”
28
61 IC
3D
Sets the most significant bit of each subsequent byte received to 0.
Accept MSB as is
Mode ASCII
Decimal Hexadecimal
Both
<ESC> “#”
21 35
IB 23
Cancels the preceding commands and accepts the most significant bit as
it is sent to the printer.
Delete last character sent
Mode
ASCII
Decimal Hexadecimal
Std. <DEL>
127 IF
Deletes the last character received. Ignored if the last character received
has already been printed, or if the last character received was all or part
of a command.