Filter
Top Products
2-6-3 Paper Guide Adjustment Mechanism
It is necessary to adjust the paper guides position for the widths of the paper to be used to handle differing paper widths on
this printer unit.
The ex-factory default setting for paper width is 82.5 ±0.5 mm. If using the printer with the paper with of 79.5 ±0.5 mm,
loosen the paper guide unit screw that is on the right side when facing the front of the printer, and adjust it to the
appropriate position. See section 7.1 Adjusting the Paper Guide Unit for details regarding how to adjust the paper guide
unit.
TSP1000 Series Product Specifications 2-13