Filter
Top Products
6. HOW TO SET ROLL PAPER
The following describes how to set roll paper.
1. While the power is on, lift the cover open lever to open the printer cover.
2. Set the roll paper, then pull the leading edge of the paper toward the front of the printer. When doing so, pull
the paper straight with regard to the printer. Set the roll paper so that it does not become loose around its
circumference.
3. Close the printer cover. Be careful that both the left and right sides are firmly closed.
4. Use the auto-cutter to cut off the excess paper.
Note 1: If the paper is poorly mounted, paper can skew, or paper can jam with the initial paper feed operation.
Reset the paper if that should happen.
TSP1000 Series Product Specifications 6-1