Filter
Top Products
TABLE10 Connectivity Map- Lower Layer Protocol (Continued)
Name Description
End DataCharacter The second tothe last envelope marker character inthe HL7 envelope, as a
decimal ASCII number.Enter a number from 1 to127. Unless there is a conict,
the value shouldbe ASCII FS (decimal 28).
End BlockCharacter The last envelopemarker character in the HL7 envelope,as a decimal ASCII
number. Enter anumber from 1 to 127. Tostrictly comply with the HL7
Standard, this propertymust be set to a carriagereturn (decimal 13).
HLLP Checksum Enabled An indicator ofwhether the HLLP Checksum is enabledor disabled.
Select true to enablechecksum values; otherwise select false.
Max Numberof Retries The maximum numberof times the adapter tries tosend a message upon
receiving the MLLPv2.0 Negative Commit Acknowledgement from thepeer
before giving up.This property is used by theadapter in outbound mode. Enter
any integer.
Sequence Number Protocol —TCP/IP HL7V2 Inbound
Adapter
The following table lists and describes the property that appears on the Sequence Number
Protocol page of the Properties Editor accessed from the Connectivity Map. This property
enables or disables HL7 sequence numbering, which is used to help prevent duplication of data.
TABLE11 Connectivity Map -Sequence Number Protocol
Name Description
Sequence Number
Enabled
An indicator ofwhether sequence numbering is enabled ordisabled. Enabling
sequence numbering helps prevent duplication of data. Select true to enable
sequence numbering; otherwiseselect false.
HL7 MSH Segment — TCP/IP HL7V2 Inbound Adapter
The following table lists and describes the properties that appear on the HL7 MSH Segment
page of the Properties Editor accessed from the Connectivity Map. These properties dene the
conguration of the MSH segment of the HL7 message. For more information about this
segment, refer to the HL7 specication (
http://www.hl7.org).
TCP/IPHL7V2AdapterInboundConnectivity MapProperties
SunAdapterforTCP/IPHL7User's Guide 41