Filter
Top Products
TABLE 53 Environment- HL7 Inbound Adapter -Sequence NumberProtocol
Name Description
Sequence NumberFile
Location
The location ofthe sequence number le (a localdirectory). This is required when
the Sequence NumberProtocol is enabled. The sequencenumber folder is a
nonvolatile directory thatstores the sequence number les usedto persist the
HL7 sequence number.The unique base le name isautomatically generated
according to projector Collaboration information.
For theinbound Adapter thele names are created as follows:
ProjectName + DeploymentName + ExternalApplicationName +
CollaborationName + .seqno
For example, prjHL7Inbound_dpIn_eaHL7Inbound_ jcdHL7inbound1.seqno
The default settingis /temp/hl7inbound/seq.
HL7 Inbound Adapter - Database Settings
The following table lists and describes the property that appears on the Database Settings page
of the Properties Editor accessed from the Environment. These properties are used for storing
HL7 messages as part of MLLP v2 support.
TABLE54 Environment - HL7 Inbound Adapter -Database Settings
Name Description
JNDIName of theJDBC
Datasource
The JNDI nameof the JDBC data source asdened in the application server. This
data source isused by MLLP v2 protocol topersist the HL7 messages before
sending a commitacknowledgment.
For moreinformation, see
“MLLP V2 andthe Sample Projects” on page140.
TCP/IP HL7 Inbound Adapter Environment Properties
The TCP/IP HL7 Adapter conguration parameters accessed from the Environment tree apply
to both the inbound and outbound Adapters, and are the same for HL7 v2 and HL7 v3
Adapters.
The onbound TCP/IP HL7 Adapter’s Environment properties are divided into the following
sections:
■
“HL7 Outbound Adapter - TCPIP Outbound Settings” on page 95
■
“HL7 Outbound Adapter - Connection Pool Settings” on page 95
■
“HL7 Outbound Adapter - Sequence Number Protocol” on page 96
ConguringSunAdapterforTCP/IPHL7EnvironmentProperties
SunAdapterforTCP/IPHL7User's Guide • October200994