Sun Microsystems IP HL 7 Computer Hardware User Manual


 
TABLE23 Connectivity Map- HL7 MSHSegment (Continued)
Name Description
Conformance Statement
ID
A unique identierthat applies to a query’s conformancestatement. Itcan also be
used as aMessage Prole Identier toassert constancy with a messageprole
(grammar, syntax, usage,and so on).
This is the21st eld in the HL7 MSHsegment (MSH-21).
Validate MSH An indicator of whether to validatethe MSH segment of the datamessage (for
inbound) and theMSH segment of the ACK (foroutbound). Select true if you
want the Collaboration to validatethe MSH segment; otherwise select false.
This parameter isused in Collaboration code.
Note Thisproperty does notaect structural validationof the entireHL7
message itself. Structuralvalidation is always performed.
HL7 SFT Segment — TCP/IP HL7V2 Outbound Adapter
The following table lists and describes the properties that appear on the HL7 SFT Segment page
of the Properties Editor accessed from the Connectivity Map. These properties dene the
conguration of the SFT segment of the HL7 message, which provides additional information
about one or more software products used as sending applications. The primary purpose of this
segment is for diagnostic use. There may be additional uses per site-specic agreements. For
more information about this segment, refer to the HL7 specication (
http://www.hl7.org).
Note The SFT segment is available starting with HL7 version 2.5.
TABLE24 Connectivity Map -HL7 SFT Segment
Name Description
Enable An indicator ofwhether the SFT optional segment isenabled in the ACK. Select
true to enable thesegment; otherwise select false.
Note If Enableis set to true,and the HL7version is not conguredas 2.5, the
adapter will errorupon startup.
Software Vendor
Organization
The name ofthe company that publishes or distributesthe sending software that
created the transaction.This eld identies the vendor responsiblefor
maintaining the application.The purpose of this eld, alongwith the remaining
elds in thissegment, is to provide a morecomplete prole of the sending
applications.
This is therst eld in the HL7 SFTsegment (SFT-01).
TCP/IPHL7V2AdapterOutboundConnectivityMapProperties
SunAdapterforTCP/IPHL7User's Guide 59