Filter
Top Products
4 – Managing Switches
Displaying Switch Information
59097-01 A 4-9
0
PROM/Boot Version PROM boot version
MAC Address Media Access Control address
IP Address Internet Protocol address
Subnet Mask Mask that determines the IP address subnet
Gateway Gateway address
SNMP Enabled SNMP enabled or disabled.
Negotiated Domain ID The domain ID currently being used by the fabric
Configured Domain ID The domain ID defined by network administrator
Domain ID Lock Domain ID lock status. Prevents (True) or permits (False)
dynamic domain ID reassignment.
Number of Ports Number of ports activated on the switch.
Operational State Switch operational state: Online, Offline, Diagnostic,
Down
Administrative State Current switch administrative state
Configured Admin State Switch administrative state that is stored in the switch
configuration
R_A_TOV Resource allocation timeout value
E_D_TOV Error detect timeout value
Interop Mode Zoning merge status. When a zone set is activated on an
FC-SW-2 compliant switch, only the active zone set is
propagated to all switches in the fabric. When a zone set
is activated on a non-FC-SW-2 compliant switch, the
active zone set and all inactive zone sets (the entire
zoning database) are stored in permanent memory. The
Interop Mode setting must be the same on all switches in
the fabric, otherwise the inter-switch links will not connect.
Legacy Address Format Legacy port addressing status. Enabled only for
interoperability with non-FC-SW-2 compliant switches.
Interop Auto Save
Zoning auto save status. Saves zoning updates in
temporary memory and the zoning database (True) or
only in temporary memory (False).
Table 4-2. Switch Data Window Entries (Continued)
Entry Description