Filter
Top Products
104 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007
Examples
-> set /SP/users/susan permission=administrator
show
Use the show command to display information about targets and properties.
The show command is used to display information about managed elements. It can
be used to view information about single managed elements, a tree of managed
elements, or managed elements matching a property value filter.
The -level option controls the depth of the show command, and it applies to all
modes of the -display option. Specifying -level 1 displays the level of the
namespace where the object exists. Values greater than 1 return information for the
target's current level in the namespace and the specified value levels below. If the
argument is -level all, it applies to the current level in the namespace and
everything below.
Syntax
show [options] target[propertyname]
/SP/AgentInfo/SNMP
community/communityname
Permission ro|rw ro
/SP/AgentInfo/SNMP/user
/username
AuthProtocol
AuthPassword
Permission
PrivacyProtocol
PrivacyPassword
MD5|SHA
string
ro|rw
none|DES
string
MD5
(Null string)
ro
DES
(null string)
/SP/network IIPaddress
DNS
IPSource
Gateway
Netmask
IP address|none
IP address|none
dhcp|static
IP address|none
IP dotted decimal
(None)
(None)
dhcp
(None)
xxx.xxx.xxx.xxx
TABLE A-10 set Command Targets, Properties, and Values (Continued)
Valid Targets Properties Values Default