Filter
Top Products
80 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007
Displaying PET Target Properties
▼ To Display PET Target Properties
● To display properties, enter the following commands:
/SP/AgentInfo/PET –> cd Destination1
/SP/AgentInfo/PET –> show
The result of executing the show command for the target, Destination1 appears:
You can now examine the values for the properties, IPAddress, MACAddress,
and Status.
Configuring Alerts
The first step to configuring alerts is to configure the PET IP address. After you
configure the IP address, you need to configure the individual PEF filter tables. Filter
tables are where you designate the specific alert-triggered actions
Use the set command to configure alerts in PET and PEF:
Syntax
set target propertyname=value
/SP/AgentInfo/PET/Destination1
Targets:
Properties:
IPAddress = 10.5.157.112
MACAddress = 00:00:00:00:00:00
Status = enable
Target Commands:
show
set