Appendix D: Adaptec HostRAID Setup Guidelines
D-5
ConguringDiskDrives
You may need to congure a disk drive before you can use it.
Caution: Conguring a disk may overwrite the partition table on the disk and may
make any data on the disk inaccessible. If the drive is used in an array, you may
not be able to use the array again.
Do not congure a disk that is part of a boot array. To determine which disks are
associated with a particular array, please refer to Viewing Array Properties.
Tocongureadiskdrive:
1. From the main menu (shown on Page D-4), select Congure Drives and hit
<Enter> (as shown below.)