Filter
Top Products
Chapter 4: BIOS
4-9
Watch Dog
Select Enabled to automatically reset the system if the system is not active for
more than 4 minutes. The options are Enabled and Disabled.
Summary Screen
This setting allows you to Enable or Disable the summary screen which displays
the system conguration during bootup.
Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
CPU Overclocking (Available when supported by the CPU)
This feature allows the user to enable and congure Overclocking settings in order
to boost system performance. The options are: Disabled, +5%, +10%, and +15%.
Please note that Supermicro does not recommend CPU Overclocking because it
might cause the system to become unstable. The default setting is Disabled. If this
feature is not set to Disabled, the following two items will display.
CPU OverVoltage (Available when supported by the CPU)
This feature allows the CPU to operate at higher voltage settings than normal
settings. The options are: Disabled, +5%, +10%, and +15%. Please note that
Supermicro does not recommend CPU OverVoltage because it might cause the
system to become unstable. The default setting is Disabled.
Memory OverVoltage (Available when supported by the CPU)
This feature allows memory modules to operate at higher voltage settings than
normal settings. The options are: Disabled, +5%, +10%, and +15%. Please note
that Supermicro does not recommend Memory OverVoltage because it might
cause the system to become unstable. The default setting is Disabled.
Core-Multi-Processing (Available when supported by the CPU)
Set to Enabled to use a processor's Second Core and beyond. (Please refer to
Intel's web site for more information.) The options are Disabled and Enabled.
Machine Checking (Available when supported by the CPU)
Set to Enabled to activate the function of Machine Checking and allow the CPU to
detect and report hardware (machine) errors via a set of model-specic registers
(MSRs). The options are Disabled and Enabled.