Filter
Top Products
4-8
C2SBA+II/C2SBA+/C2SBA/C2SBE User's Manual
ACPI Sleep Mode
This setting allows you to congure the ACPI (Advanced Conguration and Power
Interface) Sleep Mode for your system. The options are S1, S3 and S1S3.
High Precision Event Time
Select Yes to activate the High Precision Event Timer (HPET) that produce
periodic interrupts at a much higher frequency than a Real-time Clock (RTC) can
in synchronizing multimedia streams, providing smooth playback and reducing
the dependency on other timestamp calculation devices, such as an x86 RDTSC
Instruction embedded in a CPU. The High Precision Event Timer is used to replace
the 8254 Programmable Interval Timer. The default setting is No.
Power Button Behavior
If set to Instant-Off, the system will power on or power off the system immediately
as soon as the user hits the power button. The options are Instant-Off and 4-second
Override.
Resume On Modem Ring
Select On to “wake your system up” when an incoming call is received by your
modem. The options are On and Off.
Resume On PME#
Select On to “wake your system up” from the PME#. The options are On and
Off.
PS2 Keyboard (KB)/Mouse Wake Up
Select Enable to “wake your system up” from S3, S4 or S5 state. The options are
Enabled and Disabled. (This feature is available when the jumper-JKB is enabled
by closing pin 1 and pin 2. Please refer to Chapter 2.)
USB Wake Up
This feature is used to awaken the system from Standby mode by a Universal Se-
rial Bus (USB) device (such as, a USB mouse or USB keyboard). The options are
Enabled and Disabled.
Power Loss Control
This setting allows you to decide how the system will react when power returns
after an unexpected loss of power. The options are Stay Off, Power On, and
Last State.
Legacy USB Support
Select Enabled to enable Legacy USB Support. The options are Enabled and
Disabled.