Filter
Top Products
2-26
C2SBA+II/C2SBA+/C2SBA/C2SBE User's Manual
USB Wake-Up
Use JPUSB jumpers (JPUSB1/JPUSB2) to en-
able the function of "System Wake-Up via USB
devices", which allows you to "wake-up" the
system by pressing a key on the USB keyboard
or by clicking the USB mouse of your system.
The JPUSB jumpers are used together with the
USB Wake-Up function in the BIOS. Enable
both jumpers and the BIOS setting to allow the
system to "wake-up via USB Devices". See the
table on the right for jumper settings and jumper
connections. (Note: JPUSB1 is for Back Panel
USB ports:1/2/3/4/5/6, and JPUSB2 is for Front
Panel USB ports:7/8/9/10 and Front Accessible
USB ports: 11/12.)
(Note: The default jumper setting for the USB
ports is "Disabled". However, when the "USB
Wake-Up" function is enabled in the BIOS and
the desired USB ports are enabled via the
JPUSB jumper, please be sure to remove all
USB devices from the USB ports whose USB
jumpers are set to "Disabled" before the system
goes into the standby mode.)
USB Wake-up Enable
Jumper Settings
Pin# Denition
1-2 Enabled
2-3 Disabled
FAN2
FAN3
FAN1
JI2C1
JI2C2
JWOR
FAN4
JP3
JWD
JLED
Battery
DIMM1A
DIMM2A
DIMM1B
DIMM2B
I-SATA4
I-SATA5
WO
Speaker
COM1
KB/MOUSE
CPU Fan
VGA
USB
3/4/5/6
USB 1/2
LAN
Fan5
Audio
4-Pin PWR
Processor
Slot7 PCI-E x1
Slot6 PCI-E x16
Slot5 PCI-E x4
Slot4 PCI-33MHz
JP5
Slot3 PCI-33MHz
JP2
Slot2 PCI-33MHz
Buzzer
SPKR1
Slot1 PCI-33MHz
C2SBA
WOL
IDE#2
IDE#1
FP USB 7/8
FP USB 9/10
I-SATA0
I-SATA1
JL1
LE1
Front Panel CTRL
Intel G33
North Bridge
South Bridge
Intel ICH9(R)
24-pin ATX PWR
Audio CTRL
CD-IN
COM2
Front Audio
W83627DHG
Floppy
S I/O
IDE CTRL
ITE 8212
Audio Enabled
Front-Access USB 11Front-Access USB 12
I-SATA2
I-SATA3
JPUSB1
JKB
JPUSB2
GLAN CTRL
JPL1
JBT1
BIOS
Parallel Port
A
A. JPUSB1
B. JPUSB2
B