Filter
Top Products
2-4
C2SBA+II/C2SBA+/C2SBA/C2SBE User's Manual
Fan Wires
Thermal Grease
CPU
Heatsink
Fastener
Heatsink Fins
1. Locate the CPU Fan on the mother-
board. (Refer to the layout on the right
for the CPU Fan location.)
2. Position the heatsink in such a way
that the heatsink fan wires are closest
to the CPU fan and are not interfered
with other components.
3. Inspect the CPU Fan wires to make
sure that the wires are routed through
the bottom of the heatsink.
4. Remove the thin layer of the protec-
tive lm from the copper core of the
heatsink.
(Warning: CPU overheat may occur if
the protective lm is not removed from
the heatsink.)
5. Apply the proper amount of thermal
grease on the CPU. (Note: if your
heatsink came with a thermal pad,
please ignore this step.)
6. If necessary, rearrange the wires
to make sure that the wires are not
pinched between the heatsink and the
CPU. Also make sure to keep clear-
ance between the fan wires and the
ns of the heatsink.
7. Align the four heatsink fasteners
with the mounting holes on the mother-
board. Gently push the pairs of diago-
nal fasteners (#1 & #2, and #3 & #4)
into the mounting holes until you hear
a click. (Note: Make sure to orient each
fastener in a way that the narrow end of
the groove is pointing outward.)
Installation of the Heatsink
#2
#3
#4
#1
Narrow end of the groove
points outward