SUPER MICRO Computer C2SBA+II Laptop User Manual


 
Chapter 4: BIOS
4-3
Main BIOS Setup Menu
Main Setup Features
System Time
To set the system date and time, key in the correct information in the appropriate
elds. Then press the <Enter> key to save the data.
System Date
Using the arrow keys, highlight the month, day and year elds, and enter the correct
data. Press the <Enter> key to save the data.
Legacy Diskette A
This setting allows the user to set the type of oppy disk drive installed as diskette A.
The options are Disabled, 360Kb 5.25 in, 1.2MB 5.25 in, 720Kb 3.5 in, 1.44/1.25MB,
3.5 in and 2.88MB 3.5 in.
BIOS Date
The item displays the date that the BIOS was built.
Hard Disk Pre-Delay
Select Enable to allow for the time needed for a hard drive to perform initialization
before it is accessed by the BIOS after power-up to prevent possible system boot
failure. A boot failure may occur if the BIOS accesses a hard drive that has not
been properly initialized. The default setting is Disabled.