Filter
Top Products
Symbologies 10 - 9
Decode UPC/EAN/JAN Supplementals
Parameter # 10h
Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2,
EAN 13+2). Six options are available.
•
If Decode UPC/EAN/JAN Only With Supplementals is selected, UPC/EAN/JAN symbols without
supplementals are not decoded.
•
If Ignore Supplementals is selected, and the digital imager scanner is presented with a
UPC/EAN/JAN with a supplemental, the UPC/EAN/JAN is decoded and the supplemental bar code is
ignored.
•
An Autodiscriminate Option is also available. If this option is selected, choose an appropriate
UPC/EAN/JAN Supplemental Redundancy value from the next page. A value of 5 or more is
recommended.
•
Enable 378/379 Supplemental Mode to delay only EAN-13/JAN-13 bar codes starting with a ‘378’ or
‘379’ prefix by the supplemental search process. All other UPC/EAN/JAN bar codes are exempt from the
search and are reported instantly upon decode.
•
Select Enable 978 Supplemental Mode to delay only EAN-13/JAN-13 bar codes starting with a ‘978’
prefix by the supplemental search process. All other UPC/EAN/JAN bar codes are exempt from the
search and are reported instantly upon decode.
•
Select Enable Smart Supplemental Mode to delay only EAN-13/JAN-13 bar codes starting with a ‘378’,
‘379’, or ‘978’ prefix by the supplemental search process. All other UPC/EAN/JAN bar codes are exempt
from the search and are reported instantly upon decode.
NOTE To minimize the risk of invalid data transmission, select either to decode or ignore
supplemental characters.
Decode UPC/EAN/JAN Only With Supplementals
(01h)
*Ignore Supplementals
(00h)
Autodiscriminate UPC/EAN/JAN Supplementals
(02h)