Filter
Top Products
4 - 8 DS6707 Digital Imager Scanner Product Reference Guide
Trigger Mode
Parameter # 8Ah
Select one of the following trigger modes for the digital imager scanner:
•
Level - A trigger pull activates decode processing. Decode processing continues until the bar code is
decoded, the trigger is released, or the Decode Session Timeout is reached.
•
Blink - This trigger mode is used in hands-free (Intellistand) mode. The digital imager scanner activates
decode processing when it detects a bar code in its field of view. Decoding range is reduced in this mode.
•
Auto Aim- This trigger mode turns on the red laser aiming pattern when the digital imager scanner
senses motion. A trigger pull activates decode processing. After 2 seconds of inactivity the red laser
aiming pattern automatically shuts off.
Time Delay to Low Power Mode (continued)
15 Minutes
(2Bh)
1 Hour
(31h)
Level
(00h)
Blink
(07h)
*Auto Aim
(09h)