Filter
Top Products
2 - 6 DS6707 Digital Imager Scanner Product Reference Guide
Scanning in Hands-Free Mode
The optional Intellistand adds greater flexibility to scanning operation. When the digital imager scanner is
seated in the stand’s “cup,” the digital imager scanner’s built-in sensor places the digital imager scanner in
hands-free mode. When the digital imager scanner is removed from the stand it operates in its normal
hand-held mode.
Figure 2-12
Inserting the Digital Imager Scanner in the Intellistand
To operate the digital imager scanner in the IntelliStand:
1. Ensure the digital imager scanner is properly connected to the host (see the appropriate host chapter for
information on host connections).
2. Insert the digital imager scanner in the Intellistand by placing the front of the digital imager scanner into the
stand’s “cup” (see Figure 2-12).
3. Use the Intellistand’s adjustment knobs to adjust the height and angle of the digital imager scanner.
4. Center the symbol in the aiming pattern. The entire symbol must be within the brackets.
5. Upon successful decode, the digital imager scanner beeps and the LED turns green. For more information
on beeper and LED definitions, see Table 2-1 and Table 2-2.
Scanner
Holder (Cup)
Angle Adjustment Knob
Height Adjustment Knob