Filter
Top Products
Symbologies 10 - 25
Clear Transmission Buffer
To clear the transmission buffer, scan the Clear Buffer bar code below, which contains only a start character, a
dash (minus), and a stop character.
•
The digital imager scanner issues a short hi/lo/hi beep.
•
The digital imager scanner erases the transmission buffer.
•
No transmission occurs.
Transmit Buffer
There are two methods to transmit the Code 39 buffer.
1. Scan the Transmit Buffer bar code below. Only a start character, a plus (+), and a stop character.
2. The digital imager scanner transmits and clears the buffer.
•
The digital imager scanner issues a Lo/Hi beep.
3. Scan a Code 39 bar code with a leading character other than a space.
•
The digital imager scanner appends new decode data to buffered data.
•
The digital imager scanner transmits and clears the buffer.
•
The digital imager scanner signals that the buffer was transmitted with a lo/hi beep.
•
The digital imager scanner transmits and clears the buffer.
Clear Buffer
NOTE The Clear Buffer contains only the dash (minus) character. In order to scan this command,
be sure Code 39 length is set to include length 1.
Transmit Buffer
NOTE The Transmit Buffer contains only a plus (+) character. In order to scan this command, be
sure Code 39 length is set to include length 1.