Filter
Top Products
User guide Menu
47
Menu handling
Key functions You can navigate in the current menu using the three keys of the con-
trol panel.
USER key
Press the USER key to return to the previous
parameter group or parameter on the same
menu level.
The USER key is also used to change parame-
ter settings. (see also STOP key, page 48).
If this key is pressed when the first parameter
group or parameter of the respective menu
level is active, the following message appears
on the LCD display:
Pressing the USER key again will open the last
parameter group or parameter of the same
menu level.
By pressing the STOP key you will return to
the previous menu layer (see also STOP key,
page 48).
EJECT key
Press the EJECT key to select the next
parameter group or parameter on the same
menu level.
The EJECT key is also used to change
parameter settings. (see also STOP key,
page 48).
If this key is pressed when the last parameter
group or parameter of the respective menu
level is active, the following message appears
on the LCD display:
Pressing the EJECT key again will open the
first parameter group or parameter of the
same menu level.
By pressing the STOP key you will return to
the previous menu layer (see also STOP key,
page 48).
EJECTUSER
SET UP
1
2
STOP
MENU
USER
EJECTUSER
SET UP
1
2
STOP
Return to
Prev. Layer
EJECTUSER
SET UP
1
2
STOP
MENU
USER
EJECTUSER
SET UP
1
2
STOP
Return to
Prev. Layer