Filter
Top Products
Care and maintenance User guide
80
Transport of the printer
Preparations for transport If you intend to transport the printer over a short distance only, ensure
that it has been switched off correctly.
Never remove the mains plug when you can still hear mechanical
noise.
Make sure that the printer is transported horizontally. Don’t tilt the
printer nor put it upside down. Keep the packaging for future trans-
port.
Shipping the printer When shipping the printer, the printer and its accessories must be prop-
erly packed. If your carton or packing material is lost, contact your deal-
er or service representative.
Properly packing the printer requires all the original packing materi-
als.
1.
Turn off the power switches of the printer and the host computer.
Disconnect the power cord from the printer.
2.
Disconnect the interface cable.
3.
Remove the ribbon cassette (refer to section Removing the ribbon
cassette, page 33).
4.
Pack the printer and accessories in the shipping carton (refer to
section Unpacking the printer, page 5).
STOP