TANDBERG Gatekeeper User Guide
Page 10 of 105
1.4. Operator Safety Summary
For your protection please read these safety instructions completely before you connect the equipment
to the power source. Carefully observe all warnings, precautions and instructions both on the apparatus
and in these operating instructions.
Keep this manual for future reference.
1.4.1. Water and Moisture
Do not operate the apparatus under or near water - for example near a bathtub, kitchen sink, or
laundry tub, in a wet basement, near a swimming pool or in other areas with high humidity.
Never install jacks for communication cables in wet locations unless the jack is specifically
designed for wet locations.
Do not touch the product with wet hands.
1.4.2. Cleaning
Unplug the apparatus from communication lines, mains power-outlet or any power source before
cleaning or polishing. Do not use liquid cleaners or aerosol cleaners. Use a lint-free cloth lightly
moistened with water for cleaning the exterior of the apparatus.
Unplug the apparatus from communication lines before cleaning or polishing. Do not use liquid
cleaners or aerosol cleaners. Use a lint-free cloth lightly moistened with water for cleaning the
exterior of the apparatus.
1.4.3. Ventilation
Do not block any of the ventilation openings of the apparatus. Never cover the slots and
openings with a cloth or other material. Never install the apparatus near heat sources such as
radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not place the product in direct sunlight or close to a surface directly heated by the sun.
1.4.4. Lightning
Never use this apparatus, or connect/disconnect communication cables or power cables during
lightning storms.
1.4.5. Dust
Do not operate the apparatus in areas with high concentration of dust.
1.4.6. Vibration
Do not operate the apparatus in areas with vibration or place it on an unstable surface.